PhotoJack wheels · Item number
010-06019-1
SHV3-01 · Jack wheel with right-angle gearbox and vertical crank handle
250kg at max. 10 km/h
200mm travel
8"fork, 10" wheel
| Application | Site huts, trailers, scaffolding, platforms etc. where there is no room for a crank handle on top |
|---|---|
| Operation | Right-right-angle gearboxbox 1:1 with fixed crank handle on the side |
| Wheels | Solid rubber wheel 235 × 80 mm |
| Fork | 8" swivel fork with Ø30 mm pin |
| Travel in spindle | 200 mm |
| Outer tube / inner tube | 60 × 60 × 4 / 50 × 50 × 3 mm |
| Spindle | TR22×5 |
| Surface treatment | |
| Other surfaces | |
| Brackets | 066-06001, 066-06002, KF5, KF2-01, 067-06001-1 |
| Pos. | Item no. | Description |
|---|---|---|
| 2 | 202-00813-1 | Fixed crank handle (with roll pin) |
| 3 | 204-06037-1 | Outer tube 60×60×4×470 mm |
| 4 | 536-00001 | Thrust bearing 51104 |
| 5 | 205-02223 | Spindle TR22×5 mm |
| 6 | 207-05001-1 | Inner tube with nut and bush |
| 7 | Solid rubber wheel 235×80 | |
| 8 | 210-00830-1 | 8" swivel fork with Ø30 mm pin |
| 9 | 599-80115 | Wheel bolt with nut |
| 10 | 499-00105-1 | Axle Ø19×88 |
| 11 | 545-00150 | Sheet-metal gear (2 pcs.) |
| 12 | 499-00565 | Square washer |
| 13 | 512-00001 | Dowel pins (2 pcs.) |
| 14 | 525-30004 | Retaining rings (2 pcs.) |
| 15 | 542-00150 | End plug |
| 16 | 219-04508-1 | Gearbox end cap |
| 17 | 510-00230 | Flat washer |